Steel toe safety boot
- 200 joule steel toe cap, tested to SANS 20345 S3
- Full-grain cow leather 1.8–2.0 mm, oil and slip resistant PU outsole
- Sizes EU 39–48, 10 pairs per carton, 3,000 pairs per 20GP
Specification
| Upper material | Full-grain cow leather, 1.8–2.0 mm, water repellent finish |
|---|---|
| Toe cap | Steel, 200 joule impact resistance, SANS 20345 S3 |
| Sole | Dual-density PU/PU, oil resistant, slip resistant, 300°C heat resistant contact |
| Standard sizes | EU 39–48 (UK 6–13) |
| Sizes (EU) | 39, 40, 41, 42, 43, 44, 45, 46, 47, 48 |
| Minimum order quantity | 1 pair for samples; bulk quoted per carton |
| Packing (pairs per carton) | 1 pair per box, 10 pairs per carton |
| Lead time | 15–30 days from deposit confirmation |
| Price range (USD) | Quotation on request, FOB Shenzhen |
| Certification | SANS 20345 S3 test report, ISO 9001 factory, REACH conformity |
Materials and construction
The upper is full-grain cow leather finished with a water-repellent top coat, cut on a wide-fitting last so the boot can be worn with heavy work socks. The toe cap is steel, rated to 200 joules, and is fitted between the upper and the lining so it cannot shift in service.
The sole is dual-density polyurethane: a softer midsole for shock absorption and a harder outsole for abrasion. It is direct-injected to the upper, which removes the stitching line that fails first on cemented boots. The outsole is oil resistant and rated for 300°C contact heat, which matters on plant floors and in welding bays.
Inside, the lining is breathable mesh over a padded collar, with a removable EVA insole. Anti-static and energy-absorbing heel properties are tested as part of the SANS 20345 S3 classification, and the test report is sent with the quotation rather than after the order.
Size chart
| EU | UK | US (men) | Foot length (cm) |
|---|---|---|---|
| 39 | 6 | 7 | 24.5 |
| 40 | 6.5 | 7.5 | 25.3 |
| 41 | 7 | 8 | 26.0 |
| 42 | 8 | 8.5 | 26.8 |
| 43 | 9 | 9.5 | 27.5 |
| 44 | 9.5 | 10 | 28.3 |
| 45 | 10.5 | 11 | 29.0 |
| 46 | 11 | 12 | 29.8 |
| 47 | 12 | 13 | 30.5 |
| 48 | 13 | 14 | 31.3 |
Packing and container loading
Each pair is boxed with tissue and a silica sachet, then packed 10 pairs to a carton. Cartons are size-ratio packed so a mixed order does not need a separate carton per size. Loading figures below are for the standard carton; mixed cartons reduce the total slightly.
| Container | Cartons | Pairs | CBM used |
|---|---|---|---|
| 20GP | 300 | 3,000 | 28 |
| 40HQ | 750 | 7,500 | 68 |
| LCL minimum | 30 | 300 | 2.8 |
Quality control and returns
Production is inspected at three points: leather cutting, sole injection and final packing. A pre-shipment inspection is carried out on every order and the report with photographs is sent before the container is sealed. If you appoint a third-party inspector, we will schedule around their visit.
Defective pairs found on arrival are replaced in the next shipment, provided the claim is raised within 30 days of container release with photographs and the carton numbers. This is stated on the commercial invoice so both sides work from the same document.
Request the ST-102 price and test report
Send the quantity and the size breakdown. You get a per-pair price, the carton plan, the SANS 20345 report and the earliest loading date in one reply.